- 摘 要
-
（1 中船第九設計研究院工程有限公司， 上海 200063；
2 同濟大學土木工程防災國家重點實驗室， 上海 200092）
［摘要］結合隔震技術的應用現狀以及實際隔震工程設計過程中的關鍵問題，基于現階段我國隔震結構設計方法，深入探討了其中較關鍵的隔震層設計過程中各步驟的關鍵點及設計依據，并形成了可指導設計的運行流程。同時，基于該運行流程，結合某高烈度區高層框架-核心筒隔震結構，采用ETABS軟件進行了隔震層設計。分析結果表明，布置的隔震層能夠充分發揮隔震效果，使隔震結構能夠滿足初定的降度目標，并能保證在罕遇地震作用下的安全性。案例工程分析結果證明運行流程的合理性，同時也為同類隔震建筑的設計方法及隔震技術的應用提供了參考。
［關鍵詞］隔震技術； 橡膠隔震支座； 設計方法； 高層建筑； 框架核心筒
中圖分類號： TU352.1+2 文獻標識碼： A文章編號： 1002-848X(2016)S1-0434-05
Study on design method of isolation buildings and engineering application
Hu Kai1, Jiang Li1, Qu Ge1, Liu Hong1, Qian Jing1, Zhou Ying2
(1 China Shipbuilding NRDI Engineering Co., Ltd., Shanghai 200063, China;
2 State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University, Shanghai 200092, China)
Abstract: Combined with the application status of isolation technology and key problems in the process of engineering design of isolation projects, key points of each step and design basis during the isolation layer design process which is an important design stage of the isolation structure design method in our country at present were thoroughly discussed, and operation process which can guide the design was established. According to this operation process, layer design of a high-rise frame-core tube isolation structure was conducted using ETABS. And the results show that the isolation layer arrangement could fully achieve the isolation effect to meet the initial isolation target and guarantee the safety of the structure under the action of rare earthquake. The results of the project analysis proves the rationality of the operation process, which can also provide references to the design of similar isolation buildings and the application of isolation technology.
Keywords: isolation technology; laminated rubber bearing; design method; high-rise building; frame-core tube
作者簡介：胡凱，碩士，工程師， Email：whocannet@163.com。
- 下載地址
-
