- 摘 要
-
（中國航空規(guī)劃設計研究總院有限公司， 北京 100120）
［摘要］簡要介紹了某科研樓混凝土空心樓板的設計與施工。設計方面介紹了該工程的基本情況、設計標準的采用；通過兩種不同樓板方案的對比，得出空心樓板比預應力實心板節(jié)省的結論。施工方面介紹了抗浮驗算公式，通過設置抗浮拉絲、條形混凝土墊塊、卡具等措施保證填充塊不上浮、偏移。
［關鍵詞］空心樓板； 方案對比； 填充塊
中圖分類號： TU375,TU318 文獻標識碼： A文章編號： 1002-848X(2016)S2-0126-04
Design and construction of concrete hollow floors of a scientific research building
Wang Jun， Yao Renzhi， Li Xinjian
(China Aviation Planning and Design Institute (Group) Co., Ltd., Beijing 100120, China)
Abstract: A brief introduction of the design and construction of concrete hollow floors of a scientific building was given. In design aspect, the basic situation of this project and adoption of design standards were presented, the final conclusion is that the cost of hollow floors is lower than the prestressed solid floor through the comparison of two differents floor plan. In construction aspect, the formula of anti-floating checking was presented, installing anti-floating iron wire, bar-type concreat block and fixture ensure the padding block not to floating and shifting.
Keywords: hollow floor; scheme comparison; padding block
作者簡介:王軍，高級工程師，一級注冊結構工程師，Email:vivan8616@sina.com。
