國產高強度結構鋼材材性參數統計與分析*
朱希，施剛
- 摘 要
-
（土木工程安全與耐久教育部重點實驗室，清華大學土木工程系， 北京 100084）
［摘要］為了解國產高強度結構鋼材的生產情況，獲得國產高強度結構鋼材的材性參數，對目前國內主要鋼鐵企業生產的Q500，Q550和Q690結構鋼材進行了調研。調研的內容主要為材料的力學性能。同時開展了獨立的材性試驗，作為對調研收集數據的驗證和補充。對收集到的數據分企業進行了統計分析，了解每一家企業的生產情況，從而對國產高強度結構鋼材生產情況有一個全面的認識。在此基礎上，采用數理統計的方法對獨立試驗的數據和調研收集的數據進行了綜合分析，得到了不同鋼材牌號不同厚度分組材料屈服強度的統計參數，得到的材性參數將作為下一步計算高強鋼構件抗力分項系數的基礎，為《高強鋼結構設計規程》的編制提供研究依據。［關鍵詞］高強鋼; 力學性能; 屈服強度; 數理統計中圖分類號：TU391 文獻標識碼：A 文章編號：1002-848X(2015)21-0009-07
Statistics and analysis of material properties of domestic high-strength structural steels in ChinaZhu Xi, Shi Gang(Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry, Department of Civil Engineering, Tsinghua University, Beijing 100084, China)Abstract: In order to investigate the production status of domestic high-strength structural steels and obtain the parameters of material properties, Q500, Q550 and Q690 steels produced by major steel manufacturers in China have been studied. The main research content contains the data of mechanical properties. Meanwhile, the independent material test was carried out, which can be viewed as the verification and supplement of the collected data. The collected data which were firstly classified by different manufacturers were analyzed by statistical method to investigate the production status of each manufacturer, which help us to have a full picture of the production status of high-strength structural steels in China. On this basis, the collected and independent test data were classified by different grades and thicknesses. On this basis, the collected and independent test data were analyzed by the mathematical statistics method. The statistical parameters of yield strength which were classified by different grades and thicknesses were obtained, which would be used for calculating the partial factors for resistance of high-strength steels and give practical suggestions to Specification for design of high strength steel structures of China.Keywords: high-strength steel; mechanical property; yield strength; mathematical statistics
*北京高等學校青年英才計劃項目(YETP0077)。作者簡介：朱希，碩士，Email：xi_zhu@ecadi.com。
- 下載地址
-
你還沒注冊？或者沒有登錄？這篇論文要求至少是本站的注冊會員才能閱讀！
如果你還沒注冊，請趕緊點此注冊吧！
如果你已經注冊但還沒登錄，請趕緊點此登錄吧！
