加強受壓翼緣圓孔蜂窩梁的簡化計算方法*
陳向榮，陳星，王鑫偉
- 摘 要
-
（西安建筑科技大學土木工程學院， 西安 710055）
［摘要］主要研究跨度、開孔率和距高比對加強受壓翼緣圓孔蜂窩梁力學性能的影響并提出簡化設計公式。利用ABAQUS建立165個模型，得出不同跨度、開孔率和距高比的加強受壓翼緣圓孔蜂窩梁的強度、穩定承載力，分別分析上述三個參數對其力學性能的影響程度，給出此三個參數的建議取值，提出強度承載力提高系數和穩定承載力提高系數，通過線性回歸分析得到簡化設計公式。研究結果表明，開孔率、跨度分別是影響加強受壓翼緣圓孔蜂窩梁強度承載力、穩定承載力的主要因素；將有限元結果與前蘇聯鋼結構規范計算結果對比，證明簡化設計公式足夠精確，可應用于工程設計。［關鍵詞］蜂窩梁; 加強受壓翼緣; 力學性能; 有限元分析; 線性回歸分析中圖分類號：TU398.7 文獻標識碼：A 文章編號：1002-848X(2016)07-0082-04
Simplified calculation method of cellular beam with enhanced compression flangeChen Xiangrong, Chen Xing, Wang Xinwei(Department of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an 710055， China)Abstract: Mechanical properties affected by span, opening rate, distance height ratio and simplified design formulas of up-flange-stiffened cellular beams were mainly researched. By establishing 165 models with FEM analysis software ABAQUS, strength and stability bearing capacities of cellular beams were obtained on different span, opening rate and distance height ratio. The effect of these parameters on its mechanical properties were analyzed respectively. Additionally, recommended values were presented for these parameters. After data and linear-regression analysis, simplified design formulas were proposed with strength increase coefficient and stability bearing capacity increase coefficient. The following conclusions could be drawn: opening-rate and span are main factors of the strength and stability bearing capacity of cellular beam respectively. Comparing the results between FEM and designing code, the simplified design formulas are accurate and reliable enough to applied for reference to engineering practice.Keywords: cellular beam; enhanced compression flange; mechanical property; finite element analysis; liner-regression analysis
*國家自然科學青年基金資助(51208412)，住房和城鄉建設部科學基金資助（2014-k2-015），陜西省教育廳重點實驗室項目資助（15JS049）。作者簡介：陳向榮，副教授，碩士生導師， Email：cxr90@126.com。
- 下載地址
-
你還沒注冊？或者沒有登錄？這篇論文要求至少是本站的注冊會員才能閱讀！
如果你還沒注冊，請趕緊點此注冊吧！
如果你已經注冊但還沒登錄，請趕緊點此登錄吧！
