濰坊摩天輪節點參數化設計及計算分析
張高明, 馬明, 宋濤
- 摘 要
-
（中國建筑科學研究院， 北京 100013）
［摘要］在濰坊白浪河摩天輪項目中，由于構成輪盤的空間圓環存在規則的數學表達形式，所以對輪面網格桿件及其交叉節點采用了參數化的設計方法。后期，對這些參數設計節點編制了能夠自動生成有限元模型、自動進行有限元計算、自動統計結果的程序，對238個節點進行了遍歷性的有限元驗算，大大提高了對危險節點位置的甄別和處理效率。同時對摩天輪內外弦的X型和KK型節點分別進行了參數化驗算，對采用參數化設計及模型計算所生成的前處理和后處理數據進行了節點的強度驗算，相關節點的強度均滿足設計要求。［關鍵詞］摩天輪; 參數化設計; 有限元; 節點分析; 參數化建模中圖分類號：TU318.2 文獻標識碼：A 文章編號：1002-848X(2016)03-0065-05
Parametric design and analysis of the joint in the structure of the Weifang Sky WheelZhang Gaoming, Ma Ming, Song Tao(China Academy of Building Research, Beijing 100013, China)Abstract: In the design of the Sky Wheel along Bailang River in Weifang, the parametric design method was used in designs of grid members and cross joints on wheel surface, because regular mathematical expression exists in spatial circle that constitutes the wheel. In later stage, the program was compiled for these parameter design joints to automatically generate the finite element model, automatically carry out finite element calculation and automatically count results. The ergodic finite element checking calculation was carried out on the 238 joints, which greatly improved the identification and processing efficiency for locations of dangerous joints. At the same time, the parametric checking calculations were conducted on the X-shaped and KK-shaped joints of the inside and outside chords for the Sky Wheel respectively. And the strength of the joint was checked using the pre-processing and post-processing data calculated by the parametric design method and model. Relevant joints strength fulfills design requirements.Keywords:Sky Wheel; parametric design; finite element; joint analysis; automatically generate finite model
作者簡介：張高明，碩士，工程師，Email：hopeawish@163.com。
