廣州圓大廈結構設計
江毅，易偉文
- 摘 要
-
（華南理工大學建筑設計研究院， 廣州 510641）
［摘要］廣州圓大廈建筑立面中部開大洞，采用鋼斜撐框架+混凝土核心筒混合結構體系，解決了結構豎向構件不連續的問題。分別采用SATWE和MIDAS/Gen對結構進行彈性分析及彈塑性分析，采用ABAQUS對復雜節點進行有限元分析，最后采用MIDAS/Gen對結構施工階段進行仿真分析。結果表明結構具有良好的抗震性能，能夠滿足“強節點弱構件”的要求；施工過程中構件應力水平均較小，且均保持彈性狀態，結構受力與預期一致，變形及應力水平均處于合理的范圍。［關鍵詞］廣州圓大廈; 復雜結構; 節點分析; 施工模擬分析; 鋼斜撐框架+混凝土核心筒結構中圖分類號：TU318 文獻標識碼：A 文章編號：1002-848X(2016)03-0059-06
Structural design of GuangzhouCircle BuildingJiang Yi, Yi Weiwen（Architectural Design & Research Institute of South China University of Technology, Guangzhou 510641, China）Abstract:Guangzhou-Circle Building has a big hole on center of the faade and adopts steel braced frame-corewall structural system which solves the vertical discontinuity problem of structural members. Programs of SATWE and MIDAS/Gen were used to carry out elastic and elasto-plastic analyses on the structure. ABAQUS software was used to conduct finite element analysis on complicated joints. Finally MIDAS/Gen software was used to carry out construction simulation analysis. Results show that the structure has good seismic performance and can meet the requirements of the "strong joint and weak component". In construction process, components have small average stress levels and are in elastic states. The mechanism of the structure is the same as expected results and the deformation and stress levels are in a reasonable range.Keywords:Guangzhou-Circle Building; complicated structure; joint analysis; construction simulation analysis; steel braced framecorewall structure
作者簡介：江毅，碩士，副總工程師，高級工程師，一級注冊結構工程師，Email：jiangyi@scut.edu.cn。
- 下載地址
-
