中國與歐美不銹鋼焊接連接設計方法對比分析
吳耀華，邱勝光，張煜
- 摘 要
-
(中冶建筑研究總院有限公司， 北京 100088）
［摘要］針對不銹鋼焊接連接，對比了歐洲規范BS EN1993-1-4∶2006、美國不銹鋼結構設計指南和美國規范SEI/ASCE 8-02及中國規范的適用范圍、設計方法，研究了各規范對不銹鋼對接焊縫、角焊縫連接設計的基本規定和設計計算方法。分析結果表明，中國規范的焊縫強度取值與歐洲規范BS EN1993-1-4∶2006相近，美國規范SEI/ASCE 8－02對于側面角焊縫或斜向角焊縫比中國規范和歐洲規范BS EN1993-1-4的安全儲備更高。中國規范對于焊接連接設計的規定總體是合理的。［關鍵詞］不銹鋼; 對接焊縫; 角焊縫; 焊接連接; 設計方法; 規范對比中圖分類號：TU391 文獻標識碼：A 文章編號：1002-848X(2015)15-0001-04
Comparative study on stainless steel weld connection design method in European, American and Chinese design codesWu Yaohua, Qiu Shengguang, Zhang Yu（Central Research Institute of Building and Construction, MCC, Beijing 100088, China）Abstract: For stainless steel weld connections, the applicable scopes and design methods of European code BS EN1993-1-4∶2006, American stainless steel structure design guidelines and American code SEI/ASCE 8-02 and Chinese code were compared. The basic regulations and design calculation methods of stainless steel butt weld and fillet weld connection design in above codes were studied. Analyses results show that the weld strength value in Chinese code is similar to that in European Standard BS EN1993-1-4∶2006. The safety reserve of side fillet weld or oblique fillet weld in American Standard SEI/ASCE 8-02 is higher than that in Chinese code and European code BS EN1993-1-4. The requirements of Chinese code on weld connection design are generally reasonable.Keywords:stainless steel; butt weld; fillet weld; weld connection; design method; code comparison
作者簡介：吳耀華，碩士，教授級高級工程師，一級注冊結構工程師，Email:wuyaohua@vip.sina.com。
- 下載地址
-
你還沒注冊？或者沒有登錄？這篇論文要求至少是本站的注冊會員才能閱讀！
如果你還沒注冊，請趕緊點此注冊吧！
如果你已經注冊但還沒登錄，請趕緊點此登錄吧！
