- 摘 要
-
王先鐵1,2，劉立達1，周超3，高婭靜1，賈貴強1，李婷婷1
（1 西安建筑科技大學土木工程學院， 西安 710055； 2 重慶大學土木工程學院， 重慶 400045；
3 中冶京誠工程技術有限公司， 北京 100176）
［摘要］進行了一榀1/3比例單跨兩層方鋼管混凝土框架-中間開洞薄鋼板剪力墻的低周反復荷載試驗，研究了鋼板剪力墻中間開洞對方鋼管混凝土框架-薄鋼板剪力墻抗震性能的影響。利用有限元軟件ABAQUS對方鋼管混凝土框架-中間開洞薄鋼板剪力墻進行了數(shù)值分析，研究了鋼板剪力墻開洞位置、洞口寬度比、鋼板剪力墻厚度以及加勁肋等對其力學性能的影響。結果表明：開洞位置的變化對結構影響很?。辉龃箐摪寮袅Χ纯趯挾缺冉档土私Y構的承載能力和初始剛度；增大鋼板剪力墻厚度提高了結構的承載能力和初始剛度；通過在洞口周邊設置加勁肋，減小了鋼板剪力墻的高厚比，減弱了鋼板剪力墻對豎向邊緣構件的影響。
［關鍵詞］方鋼管混凝土框架； 薄鋼板剪力墻； 中間開洞； 開洞寬度比； 力學性能
中圖分類號：TU398文獻標識碼：A文章編號：1002-848X(2016)02-0043-06
Mechanical behavior study of the concrete-filled square steel tube frame-thin
steel plate shear wall with middle openings
Wang Xiantie1,2， Liu Lida1， Zhou Chao3， Gao Yajing1， Jia Guiqiang1， Li Tingting1
（1 School of Civil Engineering， Xi′an University of Architecture & Technology， Xi′an 710055， China；
2 School of Civil Engineering， Chongqing University， Chongqing 400045， China；
3 Capital Engineering & Research Incorporation Ltd.， Beijing 100176， China）
Abstract:The low cyclic loading experiment was conducted for a 1/3 scale one-bay two-story concrete-filled square steel tube frame-thin steel plate shear wall with middle openings. The influence of middle opening of steel plate shear wall on the seismic behavior was investigated for the concrete-filled square steel tube frame-thin steel plate shear wall. The nonlinear numerical analysis of the concrete-filled square steel tube frame-steel plate shear wall with middle openings by using the finite element software ABAQUS. The influence of different parameters on the mechanical properties were analyzed, including the location of the steel plate shear wall opening, the ratio of opening width to the steel plate shear wall width, the thickness of infill plates and stiffening ribs. The analytical results show that the location of the opening has little influence on the mechanical behavior of the structure. The stiffness and strength of the structure decrease with the increase of the ratio of the opening width to the steel plate shear wall width. The increase of the infill plates′ thickness enhances the bearing capacity and the initial stiffness of the structure. Setting the stiffening ribs around the openings decreases the width-to-thickness ratio of infill plates and declines the influence of the steel plate shear wall on the vertical boundary member.
Keywords:concrete-filled square steel tube frame; thin steel plate shear wall; middle opening; the ratio of the opening width to the steel plate shear wall width; mechanical behavior
*國家自然科學基金項目（51108369），住房與城鄉(xiāng)建設部科學技術項目（2014-K2-007），陜西省科技新星科研項目（2013KJXX-54）。
作者簡介：王先鐵，博士，教授，Email：wangxiantie@163.com。
