- 摘 要
-
王云燕1，孫靜2，馬金龍1
（1 河北工業大學土木工程學院， 天津 300401；2 天津津質工程技術咨詢有限公司， 天津 300134）
［摘要］在橋梁建設中，常常由于橋位處的地形限制，或者由于高等級公路對線形的要求而將橋梁做成斜交，斜橋雖然有改善線形的優點，但由于斜度的影響，受力特點與正橋也有較大的不同，其受力狀態分析十分復雜。針對不同斜交角的斜交空心板梁橋進行有限元分析，運用MIDAS/Civil建立有限元模型，理論分析斜交空心板梁橋荷載橫向傳遞規律，為橋梁的承載能力檢測與評定中荷載試驗的控制截面選擇提供理論依據，在實際工程運用中具有參考價值。
［關鍵詞］斜交空心板梁橋； 荷載試驗； 有限元法； 荷載橫向分布
中圖分類號： TU317+.2 文獻標識碼： A 文章編號： 1002-848X(2015)S2-0515-04
Control section studying in skew hollow plate girder bridge load test
Wang Yunyan1， Sun Jing2， Ma Jinlong1
(1 School of Civil Engineering, Hebei University of Technology， Tianjin 300401, China；
2 Tianjin Quality Engineering Technology Consulting Co., Ltd., Tianjin 300134， China)
Abstract: In bridge construction, because of the topography limiting at the bridge site, or requirements of high-grade highway for linear， bridges usually be made of skew bridge. Although there are advantages to improve the bridge of linear, but due to the affection of the tilt degree, the mechanical characteristics is also quite different between the skew and main bridges, and its stress state analysis is very complex. MIDAS/Civil software was used to establish finite element model to analyze different skew angle oblique hollow beam bridge and skew plate girder bridge lateral load transfer law in theory, which provides a theoretical basis for load testing of control surfaces selection and assessment of the carrying capacity, and has a reference value in practical engineering.
Keywords: skew hollow slab bridge; load test; finite element method; transverse load distribution
作者簡介：王云燕，碩士，Email:960878014@qq.com。
- 下載地址
-
