- 摘 要
-
（1 大連理工大學工程力學系工業裝備國家重點實驗室，大連 116023； 2 沈陽市民用建筑設計研究院，沈陽 100021）
［摘要］充分考慮建筑結構的特點，基于我國現行建筑結構規范相關條款提出了適合梁、柱的高效優化設計準則，分別以柱軸壓比和梁配筋率為指標構造迭代格式。通過動態編程技術在建筑結構設計專用的SATWE軟件上得到實現，對一個30層的結構進行了優化設計，結果表明該方法是有效的、可行的。
［關鍵詞］高層建筑結構；框架結構；準則法；優化設計；可行域
Optimum design of reinforced concrete framework structure based on criteria method
Li Gang1, Lu Haiyan1, Liu Xiang1, Wen Baojun2(1 Department of Engineering Mechanics, State Key Laboratory of Structure Analysis of Industrial Equipment, Dalian University of Technology, Dalian 116023, China; 2 The Institute of Shenyang Civil Building Design, Shenyang 100021, China)
Abstract:Considering the features of building structures, an efficient optimal criteria algorithm is presented for beams and columns of reinforced concrete buildings based on the regulations in the current design codes, and the recursive formulation with respect to the steel ratio and axis compression ratio is proposed. The optimal criteria algorithm is realized in the popular structural design software SATWE using dynamic programming technique. The optimal design of a practical 30-story building illustrates the efficiency and feasibility of the proposed method.
Keywords:tall building structure; frame structure; criteria method; optimization design; feasible region
*國家自然科學基金(10421002，50578028)；遼寧省自然科學基金資助。作者簡介：李剛(1966-)，男，博士，教授，博士生導師，研究方向為結構可靠度、結構優化和結構抗震設計等。
參考文獻
［1］CHAN C M,CHANG P T Y.Computer asided optimal sizing technique for tall reinforced concrete building design［C］//sixth asia-pasific conf.on struct.engng.&construction,Taiwan,1998.
［2］CHAN C M， SUN S L. Optimal drift design of tall reinforced concrete building frames,adv,in structural optimization［J］. Frangopol d.m, Cheng f y (eds.),American society of civil engineering,1997：31-42.
［3］李剛，程耿東.基于性能的結構抗震設計——理論、方法與應用［M］.北京：科學出版社，2004.
［4］李剛，楊迪雄，程耿東.基于功能的基礎隔震結構優化設計［J］. 應用力學學報，2004，21(1)：13-16.
［5］李剛，程耿東．基于可靠度和功能的框架-剪力墻結構抗震優化設計［J］.計算力學學報, 2001，18(3): 290-294.
［6］CHENG G D, LI G, CAI Y. Reliability-based structural optimization under hazard loads［J］. Structural Optimization, 1998,16：128-135.
［7］傅學怡.實用高層建筑結構設計［M］.北京：中國建筑工業出版社，2001.
［8］張炳華，侯昶.土建結構優化設計［M］.上海：同濟大學出版社，1998.
［9］江歡成，丁朝輝，杜剛，等.重慶某超限高層結構優化設計［J］.建筑結構，2004，34(6).
［10］GB50010—2002混凝土結構設計規范［S］.北京：中國建筑工業出版社，2002.
