- 摘 要
-
(西安建筑科技大學結構工程與抗震教育部重點實驗室,西安 710055)
[摘要]根據型鋼混凝土(SRC)框架結構的特點,將其性能劃分為基本完好、輕微損壞、中等破壞和防止倒塌四個水平,并用層間位移角限值予以量化;將SRC多自由度體系轉化為等效單自由度體系,導出了相應的等效參數,并根據其性能水平確定出結構的目標位移。在此基礎上,提出SRC框架結構基于位移的設計步驟,并依此對結構進行承載力設計,用靜力彈塑性分析方法對所設計的SRC規則框架結構進行推覆分析,校核結構的側移形狀與初始設計側移曲線是否一致,在不滿足變形需求時,用推覆至該性能水平時的側移曲線作為修正后的側移曲線重新計算。算例分析表明,文中方法簡便實用、結果精確,能夠?qū)崿F(xiàn)SRC框架結構基于位移抗震設計的目的。
[關鍵詞]型鋼混凝土框架結構;基于位移;性能水平;靜力彈塑性分析
Research on displacement-based design method of steel reinforced concrete frame structures
Shi Qingxuan, Wang Qiuwei, Lei Jian(Key Laboratory of Structural Engineering and Earthquake Resistant, Ministry of Education, Xi’an University of Architecture & Technology, Xi’an 710055,China)
Abstract:The seismic performance of steel reinforced concrete (SRC) frames is divided into four levels which are basically well, slight destruction, secondary destruction and collapse prevention according to their characteristics, and the four levels are quantified with storey drift angle. The SRC multi-degree-of-freedom system is transformed into an equivalent single-degree-offreedom system and the corresponding parameters are derived, and the target displacement is also determined according to the corresponding performance levels. The displacement-based seismic design procedure of SRC structures is put forward, by which one regular SRC building is analyzed using Pushover analysis method, and the pushover drift curve is taken as the modified drift shape and the structure should be redesigned if the deformation resistance is insufficient. At last the numerical example shows that the method is accurate enough to achieve the aim of displacement-based seismic design of SRC structures.
Keywords:steel reinforced concrete frame structures; displacement-based; seismic performance levels; Pushover analysis
*高等學校博士學科點專項科研基金批準項目(20060703008)。
作者簡介:史慶軒,教授,博導,Email:qingxuanshi@sina.com。
參考文獻
[1]KOWALSKY M J, PRIESTLEY M J N, MACRAE G A. Displacement-based design of RC bridge columns in seismic region[J]. Earthquake Engineering and Structural Dynamics, 1995, (24): 1623-1643.
[2]錢稼茹,羅文斌. 建筑結構基于位移的抗震設計[J]. 建筑結構,2001,31(4):201-209.
[3]MIRANDA E, GARCIA J G. Evaluation of approximate methods of estimate maximum inelastic displacement demands[J]. Earthquake Engineering and Structural Dynamics, 2002, 31(3): 539-560.
[4]SEAOC VISION 2000 Committee. Performance-Based Seismic Engineering[S]. Sacramento, California, US, 1995.
[5]GB50011—2001建筑抗震設計規范[S]. 北京:中國建筑工業出版社,2002.
[6]KOWALSKY M L. Displacement-based Design a Methodology for Seismic Design Applied to RC Bridge Columns[D]. University of California at San Diego, 1994.
[7]TAKEDA T, SOZEN M A, NIELSON N N. Reinforced concrete response to simulated earthquakes[J]. Journal of Structural Engineering, 1970, 96(12):2557-2573.
[8]JGJ138—2001/J130—2001型鋼混凝土組合結構技術規程[S]. 北京:中國建筑工業出版社,2001.
[9]門進杰. 不規則鋼筋混凝土框架結構基于性能的抗震設計理論和方法[D]. 西安:西安建筑科技大學, 2007.
[10]雷健. 型鋼混凝土框架結構基于位移的抗震設計理論和方法[D]. 西安:西安建筑科技大學, 2008.
- 下載地址
-
你還沒注冊?或者沒有登錄?這篇論文要求至少是本站的注冊會員才能閱讀!
如果你還沒注冊,請趕緊點此注冊吧!
如果你已經注冊但還沒登錄,請趕緊點此登錄吧!