884aa四虎影成人精品,99久久国产综合精品女图图等你,97在线观看永久免费视频,久久精品国产精品亚洲38,ⅵdeodesetv性欧美

（中國人民武裝警察部隊學院消防工程系，廊坊 065000）

［摘要］對兩種耐火鋼(FR)與普通結構鋼在常溫到高溫700℃之間的力學性能比較試驗研究結果顯示，耐火鋼比普通結構鋼具有更好的高溫力學性能，耐火鋼在約650℃時的屈服強度為常溫下強度的50%，而普通結構鋼在550℃時的屈服強度就已降到常溫下強度的50%。同時耐火鋼的高溫（600℃）蠕變也比普通結構鋼的小。研究結果表明在建筑設計中用耐火鋼替代需要采取防火措施的普通結構鋼更經濟安全。

［關鍵詞］耐火鋼；高溫；力學性能；蠕變

Comparing experiment on strength of FR steel and  conventional structural steel at elevated temperature

Xu Wenyi，Li Huanqun，Peng Tianguo(Department of Fire Engineering, College of Armed Policeman，Langfang 065000，China)

Abstract:The mechanical properties of two fire-resistant(FR) structural steels and a conventional structural steel have been investigated from room temperature up to 700℃. It has been found that the high temperature mechanical properties of FR steels are superior to those of the conventional structural steel. The FR steels retain 50% of their room temperature yield strength at approximately 650℃,compared to 550℃ for the conventional structural steel. And the FR steels also exhibited lower creep at high temperarure than the conventional structural steel at 600℃. The research result indicates that it is more economic and safe that use the FR steels instead of the conventional structural steel in structural-desigin.

Keywords:fire-resistant steel; high temperature; mechanical properties; creep

作者簡介：徐文毅，副教授，Email:xuwenyiwjxy@163.com。

參考文獻

［1］趙金城.高溫下鋼材力學性能的試驗研究［J］.建筑結構，2000，30（4）.

［2］李國強，蔣首超，林桂祥.鋼結構抗火計算與設計［M］.北京:中國建筑工業出版社，1999.

［3］SAKUMOTO Y,YAMAGUCHI T,OHASHI M,et al.High temperature properties of fireresistant steel for buildings［J］,ASCE,J Struct Eng，1992，118(2):392-407.

［4］HONEYCOMBE RWK,BHADESHIA HKDH.Steels,microstructure and properties［J］.Edward Arnold,1995:290.

［5］陳曉.耐火耐候建筑用鋼與普通碳素結構鋼高溫及耐火性能的對比研究［C］//第二屆鋼結構耐火協會論文集，2003.

［6］Eurocode3: Design of steel structures, Part 1.2: General rules/Structural fire design［S］. ENV1993-1-2.