結構實驗室反力墻試驗系統設計與施工分析
侯鵬，顧燕寧，張世憲，曹向明
- 摘 要
-
（中國中建設計集團有限公司（直營總部）， 北京 100037）［摘要］擬動力加載系統針對于土木工程結構擬靜力和擬動力試驗，是結構實驗室必備的試驗設備，而反力墻試驗系統是整個實驗室的重要組成部分。以中國建筑股份有限公司技術中心試驗樓內反力墻試驗系統的建立為例，介紹大型結構實驗室反力墻試驗系統的荷載取值依據，通過有限元軟件進行建模計算分析，給出反力墻及反力地板的設計方法并進行施工圖的設計，同時也提出施工過程中反力墻及反力地板的質量控制指標及施工要點。［關鍵詞］反力墻試驗系統; 加載孔; 鋼骨混凝土; 預應力中圖分類號：TU318.2 文獻標識碼：A 文章編號：1002-848X(2014)23-0020-05Design and construction analysis of reacting force wall experimental system in structure laboratoryHou Peng, Gu Yanning, Zhang Shixian, Cao Xiangming(China Construction Engineering Design Group Corporation Limited(Head Quarter), Beijing 100037, China)Abstract: Pseudo-dynamic loading system is the essential experimental equipment for the structure laboratory directed at the test of pseudo-dynamic and pseudo-static for civil engineering, and the reacting force wall experimental system is an important part of the whole experimental laboratory. Taking the building of reacting force wall experimental system of CSCEC Ltd for example, the basis for loading on the reacting force wall experimental system of large-scale structure laboratory was introduced. Using the finite element software to model and analyze, the design methods of reacting force wall and reacting force floor were given and the design drawings were carried out. The key construction points and quality control indexes of the reacting force wall and reacting force floor in the process of construction were also put forward.Keywords: reacting force wall experimental system; loading hole; steel reinforced concrete; pre-stressed作者簡介：侯鵬，碩士，高級工程師，一級注冊結構工程師，Email：p_hou@163.com。
