矩形頂管斜向出洞設計施工要點分析
黃 斌
- 摘 要
-
(同濟大學建筑設計研究院(集團)有限公司, 上海 200092)[摘要] 矩形頂管通常為垂直出洞(即頂管軸線與工作井出洞側墻基本成90°,一般不小于85°)，而大角度斜向出洞罕有先例,本文通過一個大角度斜向出洞的案例分析此類情況下的設計施工要點。[關鍵詞] 矩形頂管；斜向出洞中圖分類號： TU354 文獻標識碼：A 文章編號：1002-848X(2013)S2-0126-03Analysis on key design and construction points of rectangular pipe jacking oblique caveHuang Bin(Tongji Architectural Design (Group) Co., Ltd., Shanghai 200092, China)Abstract: Rectangular pipe jacking usually drives vertically out of tunnel, i.e. the angle of the pipe axis and side wall of work well to drive holes is 90°, generally not less than 85 °. Driving obliquely holes with high angle to get out of the tunnel is rare in engineering. Through a large angle oblique hole case, key points of this kind of design and construction are analyzed.Keywords: rectangular pipe jacking; driving obliquely out of tunnel
- 下載地址
-
你還沒注冊？或者沒有登錄？這篇論文要求至少是本站的注冊會員才能閱讀！
如果你還沒注冊，請趕緊點此注冊吧！
如果你已經注冊但還沒登錄，請趕緊點此登錄吧！
