- 摘 要
-
(1 同濟大學土木工程學院建筑工程系,上海 200092;2 中國建筑科學研究院,北京 100013)
[摘要]房屋結構中的柱上下錯位且尺寸受限時,可采用內置型鋼的混凝土搭接柱轉換結構實現力的傳遞。采用試驗和數值模擬方法,研究此種結構受力性能。研究表明,搭接塊的極限承載力隨含鋼率增加而提高,對常見的搭接比例不大于0.52的情況,搭接塊的極限承載力可提高20%~40%。在含鋼率相同的情況下,搭接塊的極限承載力隨型鋼水平組件橫截面面積的增大而增大,隨搭接比例的增大而減小。
[關鍵詞]搭接柱轉換結構; 搭接塊; 型鋼; 試驗研究; 數值模擬
中圖分類號:TU398+.9 文獻標識碼:A 文章編號:1002-848X(2014)15-0045-06
Experimental study and FEM analysis of the overlapping column transfer structure with encased structural steel
Lin Feng1, Sun Wenbin1, Zhao Pengfei2
(1 Department of Building Engineering, College of Civil Engineering, Tongji University, Shanghai 200092, China; 2 China Academy of Building Research, Beijing 100013, China)
Abstract: Overlapping column transfer structures with encased structural steel can transfer the forces in the situation when columns are discontinuous at floor levels with limited dimensions. The structural performance of this type of structure was studied experimentally and numerically. Results show that the ultimate bearing capacity of transfer blocks improves with the increase of the steel ratio and increases as high as 20%~40% when the overlapping ratios are no more than 0.52. For a given steel ratio, the ultimate bearing capacitiy of transfer blocks improves with the increase of cross-section areas of horizontal components of the structural steel, and with the decrease of overlapping ratios.
Keywords: overlapping column transfer structure; transfer block; structural steel; experimental study; numerical simulation
作者簡介:林峰,博士,副教授,Email: lin_feng@#edu.cn。
參考文獻
[1]徐培福,傅學怡,耿娜娜,等.搭接柱轉換結構的試驗研究與設計要點[J]. 建筑結構,2003, 33(12):3-7.
[2]張維斌.鋼筋混凝土帶轉換層結構設計釋疑及工程實例[M]. 北京:中國建筑工業出版社,2008.
[3]李可.平安全國后援中心搭接柱轉換結構設計[J]. 結構工程師,2006, 22(2):9-12.
[4]朱祖敬,趙松林,賀銳波.天河方圓酒店搭接柱轉換結構設計[J]. 建筑結構,2012, 42(6):77-81, 102.
[5]THORNTON C H, HUNGSPRUKE U, JOSEPH L M. Design of the world’s tallest buildings-Petronas twin towers at Kuala Lumpur City Centre[J]. The Structural Design of Tall Buildings, 1997(6):245-262.
[6]傅學怡,雷康兒,楊想兵,等.福建興業銀行大廈搭接柱轉換結構研究應用[J]. 建筑結構,2003, 33(12):8-12.
[7]全學友,孔志堅,鄧凡,等.上部邊框柱外移時搭接柱轉換結構的試驗研究[J].建筑結構,2006, 36(2):25-28.
[8]顧磊,傅學怡.福建興業銀行大廈搭接柱轉換結構有限元分析和預應力策略[J]. 建筑結構,2003, 33(12):13-16.
[9]呂西林,張翠強,李檢保,等.搭接柱轉換大底盤多塔樓結構抗震性能分析[J]. 建筑結構學報,2011, 32(6):10-17.
[10]孫文彬. 內置型鋼混凝土搭接柱轉換結構受力性能研究[D]. 上海:同濟大學,2013.
[11]GB 50010—2010 混凝土結構設計規范[S]. 北京: 中國建筑工業出版社, 2011.
[12]陸新征,葉列平,繆志偉. 建筑抗震彈塑性分析[M]. 北京:中國建筑工業出版社,2010:124-125.
[13]JGJ 138—2001 型鋼混凝土組合結構技術規程[S]. 北京:中國建筑工業出版社,2002.
[14]YB 9082—97 鋼骨混凝土結構設計規程[S]. 北京:冶金工業出版社,1998.
- 下載地址
-
你還沒注冊?或者沒有登錄?這篇論文要求至少是本站的注冊會員才能閱讀!
如果你還沒注冊,請趕緊點此注冊吧!
如果你已經注冊但還沒登錄,請趕緊點此登錄吧!