- 摘 要
-
（1 北京建筑大學， 北京 100044； 2 北京市建筑設計研究院有限公司， 北京 100045）
［摘要］框架-核心筒結構和筒中筒結構是目前在高層和超高層建筑中應用最為廣泛的兩種結構體系。規范對這兩種結構體系有不同的規定，然而兩者是否存在明確的界限，究竟外框架剛度達到什么樣的程度時框架-核心筒結構就變成了筒中筒結構，規范并沒有給出明確的界定標準。以實際工程為背景，通過改變柱距和梁高來衡量兩種結構體系在力學特性和設計上的差別，如傾覆力矩百分比、剪力百分比、位移角、周期等，從而建立相應的評判標準，為規范和結構設計提供參考。
［關鍵詞］框架-核心筒; 筒中筒; 傾覆力矩; 剪力百分比; 周期; 位移角; 判別
中圖分類號：TU973.17 文獻標識碼：A 文章編號：1002-848X(2014)14-0086-06
Research on the differentiation of frame-core wall structure and tube-tube structure
Xie Junjun1, Zhou Sun2, He Xixi1
(1 Beijing University of Civil Engineering and Architecture, Beijing 100044, China; 2 Beijing Institute of Architectural Design, Beijing 100045, China)
Abstract: Frame-core wall structure and tube-in-tube structure are two kinds of structural systems that are most popularly used in high-rise and super tall buildings. Different provisions exist in codes for these two kinds of structural systems. However, there is still no clear boundary in codes between these two structural systems about the critical frame stiffness values that can convert frame-core wall structure to tube-in-tube structure. Based on the practical project, the column space and beam height were changed to compare the mechanical characteristics and design method of two structural systems, including overturning moment percentage, shear force percentage, displacement angle and period. Corresponding evaluation standards were established to provide reference for the codes and structural design.
Keywords: frame-core wall; tube-in-tube; overturning moment; shear force percentage; period; displacement angle; differentiate
作者簡介：謝軍君，碩士，Email：591477929@qq.com。
參考文獻
［1］KHAN F R. Evolution of structural systems for high-rise buildings in steel and concrete［C］//Tall Buildings in the Middle and East Europe: Proceedings of the 10th Regional Conference on Tall Buildings-Planning, Design and Construction. Bratislava: Czechoslovak Scientific and Technical Association，1973.
［2］COULL A, ASCE F, AHMED A K. Deflections of framed-tube structures ［J］. Journal of the Structure Division, ASCE, 1978，104(5):857-862.
［3］全國民用建筑工程設計技術措施-結構（混凝土結構）［M］. 北京：中國計劃出版社，2009.
［4］JGJ 3—2010高層建筑混凝土結構技術規程［S］. 北京：中國建筑工業出版社，2011.
［5］CECS 230∶2008高層建筑鋼混凝土混合結構設計規程［S］. 北京：中國計劃出版社，2008.
［6］GB 50011—2010建筑抗震設計規范［S］. 北京：中國建筑工業出版社，2010.
［7］IYENGAR S H. Structural systems for two ultra high-rise structures［C］// Australia and New Zealand Conference on the Planning and Design of Tall Buildings, Sydney, Australia, 1973.
［8］IBC 2000 International building code ［S］. 2000.
［9］趙西安. 現代高層建筑結構設計［M］. 北京：科學出版社，2000.
［10］包世華， 張銅生. 高層建筑結構設計和計算［M］. 北京：清華大學出版社，2007.
［11］傅學怡. 實用高層建筑結構設計［M］. 北京：中國建筑工業出版社，2010.
［12］方鄂華. 高層建筑鋼筋混凝土結構概念設計［M］. 北京：機械工業出版社，2004.
