- 摘 要
-
（中船七院上海建筑設計所，上海200031）
[摘要] 某工業園區內的一棟多層通用廠房，建于2009年，鋼筋混凝土框架結構。2010年進行結構改造，在樓層和屋面增加了大量實驗設備，使用活荷載超過了原設計值。本文詳細介紹了該改造工程設計中，框架柱、梁的加固方法和構造措施。該改造方法通過調整設備布置，減小對原有結構的影響，從而達到縮短施工周期、降低工程造價的目的，為類似工程提供參考。
[關鍵詞] 改造;加固;既有結構;框架結構;構造措施
中圖分類號：TU375 文獻標識碼：A 文章編號：1002-848X(2013)S1-1393-04
Strengthening design of a multi-story general plant in an industrial park
Zhao Binhua
（Shanghai Architecture Design Institute of CSRDA,Shanghai 200031, China）
Abstract：A multi-story general plant in an industrial park was built with a reinforced concrete frame structure system in 2009. It was rebuilt in 2010. Because of adding a great deal of laboratory equipment on the floors and roofing，the live load exceeded the value of the original design. This paper gives out some key points of the structure rebuilding design，which involve the strengthening and construction methods of the columns and beams. This method decreased the impact on the existing structure through the arrangement of the adjustment device. It can reduce the construction period and cut down the construction cost. The design experience can be referred to similar engineering.
Keywords：rebuild; strengthening; existing structure; frame structure; construction measure
- 下載地址
-
