- 摘 要
-
（蘇州設計研究院股份有限公司， 蘇州 215021）
［摘要］詳細介紹了蘇州星海街9號既有廠房改造結構設計的思路、方法及改造設計全過程。根據改造前可靠度鑒定結果，充分利用原廠房特點，發揮原結構盈余度，保留原廠房90%以上結構；采用預制方樁進行地基基礎加固；采用現澆空心樓蓋進行加層設計；對外加走廊、入口門廳、內庭院開洞等設計進行了詳細分析和合理構造；另外對改造前后主體結構進行整體對比分析計算，提供了新增樓面與原結構連接的不同方法，且對加層改造后整體結構再次進行檢測鑒定，確保結構安全。
［關鍵詞］既有廠房; 結構鑒定; 加層; 改造; 加固設計; 對比分析
中圖分類號：TU318.2 文獻標識碼：A 文章編號：1002-848X(2014)03-0056-07
Structural design of original factory reconstitution in No.9 Xinghai Street of Suzhou
Yuan Xuefen, Zhang Min, Dai Yaping, Lian Haoliang
（Suzhou Institute of Architectural Design Co., Ltd., Suzhou 215021, China）
Abstract:Design idea, methods and the entire design process of the original factory reconstitution in No.9 Xinghai Street of Suzhou were introduced. Based on the reliability qualification tests before reconstitution, more than 90% original structure of the factory was retained, making full use of the original factory’s characteristics and structural surplus. Prefab square piles were used to strengthen foundations. Cast-in-situ concrete hollow floor structure was used to add floors. Detailed analysis and reasonable constitution were carried out for outside corridors, entrance hall and the hole in the inner courtyards. Analysis and calculation results of the overall structure before and after the reconstitution were compared. Different methods of connecting the new added floor and the old structure were provided. Additional qualification tests of the whole structure after reconstitution were carried out to ensure safety.
Keywords: original factory; structural qualification; adding floor; reconstitution; strengthening design; comparative analysis
作者簡介：袁雪芬，碩士，研究員級高級工程師，一級注冊結構工程師，副總工程師，Email:xuefen.yuan@siad-c.com。
參考文獻
［1］GB 50011—2001建筑抗震設計規范［S］. 2008年版. 北京:中國建筑工業出版社,2008.
［2］GB 50292—1999 民用建筑可靠性鑒定標準［S］. 北京: 中國建筑工業出版社,1999.
［3］GB 50023—2009 建筑抗震鑒定標準［S］. 北京: 中國建筑工業出版社,2009
［4］CECS 175∶2004 現澆混凝土空心樓蓋結構技術規程［S］. 北京: 中國計劃出版社,2005.
［5］GB 50367—2006 混凝土結構加固設計規范［S］. 北京: 中國建筑工業出版社,2006.
［6］JGJ 117—98 民用建筑修繕工程查勘與設計規程［S］. 北京: 中國建筑工業出版社,1999.
