受力蒙皮體的有限元計算分析
劉洋1,2；張其林1
- 摘 要
-
(1 同濟大學建筑工程系上海 200092； 2 廣州市城市規劃勘測設計研究院510060)［提要］以蒙皮組合體為研究對象，采用非線性有限元方法，將受力蒙皮體離散成不同單元，對其進行了計算分析，得出了蒙皮組合體在平面內剪切荷載作用下的工作性能以及各種因素對其抗剪性能的影響。最后將有限元計算結果與歐洲建議(EUR)的簡化計算結果進行了比較，結果表明二者吻合較好。［關鍵詞］蒙皮組合體 非線性有限元 抗剪性能Finite Element Analysis on Stressed Skin Diaphragm/Liu Yang1,2, Zhang Qilin1 (1 Department of Building Engineering, Tongji University, Shanghai 200092, China; 2 Guangzhou Urban Planning ＆ Design Survey Research Institute, Guangzhou 510060, China)Abstract:Diaphragm assembly is investigated. Discretised into various elements, the stressed skin diaphragm assembly is analyzed using the nonlinear finite element theory. The working behaviors of the diaphragm assembly under shear loads in plane and various factors that affect its shear capacity, failure modes and mechanism are studied. The results of finite element are compared with those recommended in Europe Recommendations (EUR), and it is showed that they coincide well.Keywords:diaphragm assembly; nonlinear finite element; shear behavior
