空間結構二階分析法與其在SAP2000程序中的實現
周斌, 王啟文，楊旺華
- 摘 要
-
（深圳市建筑設計研究總院有限公司，深圳518031）[摘要] 隨著復雜空間鋼結構的廣泛應用，其結構形式也越來越復雜，基于有效計算長度系數設計方法的局限性越來越大，而直接二階分析方法能更好的處理空間鋼結構的穩定計算問題，因此直接二階分析方法的應用也越來越廣泛，歐美規范已把直接二階設計方法作為主要設計方法。本文介紹了復雜空間結構的二階分析方法以及通過SAP2000的二次開發，實現采用SAP2000程序?qū)?fù)雜空間結構進行直接二階分析設計，并通過相應的算例說明了直接二階分析方法的可靠性和適用性。[關鍵詞] 空間結構;直接二階分析方法;二次開發中圖分類號：TU391 文獻標識碼：A 文章編號：1002-848X(2013)S1-0859-04Direct second-order analysis method for spatial structure and its achievement in SAP2000 programZhou Bin,Wang Qiwen,Yang Wanghua( Shenzhen General Institute of Architectural Design & Research Co., Ltd., Shenzhen 518031,Abstract: With the extensive application of spatial steel structure, its structure is also more and more complex and the design method based on effective length factor is limited for this structure, but direct second-order analysis method can better deal with stability problems of this structure, so the application of the direct second-order analysis method is more and more widely, direct second-order analysis and design method has been the main design method in Europe and the United States' design code. It is introduced the method of direct second-order analysis in this paper,and the secondary development of SAP2000 which we can achieve the direct second-order analysis based on SAP2000. Finally, reliability and applicability of direct second-order analysis method was demonstrated by the case study.Keywords: spatial structure;direct second-order analysis method;secondary development
- 下載地址
-
你還沒注冊？或者沒有登錄？這篇論文要求至少是本站的注冊會員才能閱讀！
如果你還沒注冊，請趕緊點此注冊吧！
如果你已經注冊但還沒登錄，請趕緊點此登錄吧！
