新型預制裝配式混凝土樓蓋平面內受力性能非線性有限元分析*
武川川1，朱筱俊2，梁書亭3 ，龐瑞4，劉杰3
- 摘 要
-
(1蘇州設計研究院股份有限公司，215021；2 東南大學建筑設計研究院，南京 210096；3 東南大學土木工程學院，南京 210096；4河南工業大學土木建筑學院，鄭州 450001）[摘要] 已有試驗結果表明，預制裝配式混凝土樓蓋平面內受力性能受連接件的個數及間距、連接件抗彎鋼筋強度等因素的影響，但是目前還沒有提出具體的影響程度。本文以混凝土強度、連接件的個數及間距、連接件抗彎鋼筋強度，邊梁縱筋強度，邊梁箍筋強度為參數，通過對其平面內水平荷載作用下的數值模擬分析，研究以上參數對預制裝配式混凝土樓蓋荷載-位移曲線的影響規律，為預制裝配式混凝土樓蓋的設計和施工提供參考。[關鍵詞] 預制裝配式;樓蓋;平面內中圖分類號： TU375 文獻標識碼：A 文章編號：1002-848X(2013)s1-0677-04Nonlinear FE analysis on in-plane load-bearing behavior of the new-type precast fabricated concrete diaphragmsWu Chuanchuan1 ，Zhu Xiaojun2 ，Liang Shuting 3 ，Pang Rui 4 ，Liu Jie3(1 Suzhou Institute of Architectural Design Co. , Ltd. , Suzhou ,215021, China; 2 Architectural Design & Research Institute of Southeast University, Nanjing, 210096, China; 3 College of Civil Engineering, Southeast University, Nanjing, 210096, China; 4 College of Civil Engineering and Architecture Henan University of Technology , Zhengzhou, 450001, China)Abstract: The experimental results show that the In-Plane Load-Bearing Behavior of the New-Type Precast fabricated Concrete Diaphragms is strongly influenced by factors like the number and spacing of the connector, the strength of the connector bending reinforcement, but there is no such specific impact on it at present. The effects of the load-displacement curves of the new-type precast fabricated concrete diaphragms were studied, through numerical simulation analysis of it under in-plane force. The concrete strength, the number and spacing of the connector, the strength of the connector bending reinforcement, boundary beam longitudinal reinforcement strength, boundary beam stirrups strength are taken as parameters. On the basis of analysis, the recommendations on the New-Type Precast fabricated Concrete Diaphragms are proposed for design and construction.Keywords: precast fabricated; diaphragm; in-plane
- 下載地址
-
你還沒注冊？或者沒有登錄？這篇論文要求至少是本站的注冊會員才能閱讀！
如果你還沒注冊，請趕緊點此注冊吧！
如果你已經注冊但還沒登錄，請趕緊點此登錄吧！
