單管塔插接連接節點抗彎剛度的試驗研究*
羅 烈1, 涂望龍1, 溫皓然1, 李 娟2
- 摘 要
-
（1 同濟大學建筑工程系, 上海 200092； 2 維蒙特工業（中國）有限公司, 上海 200000）[摘要]插接節點是單管鋼塔的一種常見的塔身鋼管連接形式。本文通過5個插接節點的足尺模型抗彎靜力試驗，研究了插接節點軸向壓力、截面形狀、插接長度、插接段內外鋼管貼合率等因素對節點彈性抗彎剛度的影響以及加載至破壞過程中的剛度變化特征，并與有限元計算分析結果進行了對比。結果表明實際的插接節點抗彎剛度弱于連續鋼管，應在工程設計中予以考慮。[關鍵詞]單管塔; 插接連接; 抗彎剛度; 插接長度中圖分類號：TU398.7 文獻標志嗎：A 文章編號：1002-848X(2013)S1-0431-05Luo Lie1, Tu Wanglong1, Wen Haoran1, Li Juan2（1 Department of Building Engineering, Tongji University，Shanghai 200092, Chian2 Valmont Industries (China),Inc.,Shanghai 200092, Chian）Abstract:Slip joint connections have been used very commonly in steel monopoles. Five prototype slip joints subjected in static loads were tested in this paper. The effects of axial force, section shape, overlap length and contact state between the inner and outer tubes on the elastic flexural rigidity of the joints were researched by the analysis of experimental data and its comparison with the results of the finite element analysis. In the meanwhile, the variation characteristic of flexural rigidity from the elastic flexural stage to the failure stage was analyzed. The conclusion shows that the elastic flexural rigidity of slip joint is weaker than the continuous tube.Keywords:monopole; slip joint connections; flexural rigidity; overlap length
- 下載地址
-
