環境氣候?qū)嶒?yàn)室混凝土筒體設計
陳磊，趙宏康，丁磊
- 摘 要
-
（蘇州設計研究院股份有限公司， 蘇州 215021）［摘要］介紹了國家電器產品質量監督檢驗中心環境氣候?qū)嶒?yàn)室混凝土筒體的結構設計，對該類筒體結構的設計要點進行了詳細分析。在重力荷載和試驗荷載作用下，球殼頂根部的環梁受到較大的拉力，為控制環梁裂縫，抵抗環向拉力，工程中環梁采用了部分預應力技術。針對承受較大荷載的筒體上開有大洞口的情況，進行了應力分析，并依據分析結果，對洞口角部進行了加強。［關鍵詞］混凝土筒體； 預應力環梁； 有限元分析中圖分類號：TU378.8 文獻標識碼：A 文章編號：1002-848X(2013)20-0073-03Structural design of concrete cylinder of Environment and Climate LaboratoryChen Lei, Zhao Hongkang, Ding Lei(Suzhou Institute of Architectural Design Co., Ltd., Suzhou 215021, China)Abstract: Structural design of concrete cylinder of Environment and Climate Laboratory in National Electrical Products Quality Supervision and Inspection Center was introduced．Detailed analysis of design method of cylinder structure was provided．The gravity load and test load resulted in large tension forces in the ring beam of the shell. Partially prestressed technique is used in the ring beam to control the crack width and resist the circumferential tension forces. For the case of large hole on the cylinder structure, stress analysis was carried out and corners of the hole were strengthened.Keywords: concrete cylinder; prestressed ring beam; finite element analysis作者簡介：陳磊，碩士，高級工程師，一級注冊結構工程師，Email:lei.chen@siad-c.com。參考文獻［1］孟美莉，傅學怡，吳兵.卡塔爾某超高層建筑部分預應力環梁設計研究［J］.建筑結構,2008,38(12):69-72.
- 下載地址
-
你還沒注冊？或者沒有登錄？這篇論文要求至少是本站的注冊會員才能閱讀！
如果你還沒注冊，請趕緊點此注冊吧！
如果你已經注冊但還沒登錄，請趕緊點此登錄吧！
